Seepage Control Inc. - Sealing Lakes and Ponds with ESS-13

ESS-13 is pumped or poured directly into the water at a pre-determined application rate. The seepage in your pond will decrease 60% to 90% initially, and this original rate will continue to improve with time.

Lake and Pond Contracting

Click here for more information.

The ESS-13 “Spray-On Formulation” can save 75% or more off the installation costs of other lake sealing methods.

Repairing Lakes and Ponds with the Spray-On Method

Click here for more information.

ESS-13 is pre-mixed with our E-13 compaction aid, pumped in pre-measured quantities into the soil with conventional earth moving equipment. The treated soil is then compacted in two consecutive six inch layers.

Treated and Compacted Method of Fixing Lakes and Ponds

Click here for more information.

Address:
115 S. Weber Drive Suite 2
Chandler, AZ 85226
  USA 

Toll Free Phone: 1.800.214.9640
Local Phone:
480.763.1180
Fax: 480.763.1182

info@seepagecontrol.com



Measurement Assistant


only search Seepage Control     

In determining the amount of product necessary in treating your pond it is important for us to be clear on a couple of things: the current vertical loss in 24 hr, and the slope angle of the pond. This page will help to make sure that we are all referring to the same measurements.

Vertical Loss

In measuring the 24 hr vertical loss it is usefull to use a steel ruler or staff guage that is driven into the ground in an area of the pond that is easily accessible. The pond should have water in this area for the entire 24 hr period as well. Simply note the elevation on the ruler at the start of the test and return the next day to determine the new elevation.Vetical Loss of Water in Lake or Pond

 

 

 

 

 

 

 

 

Slope

Slope is determined by measuring the length of the slope and the depth of the pond. It is usually expressed as Length : Depth (ie. 4:1, 2:1, 1:1, etc.)

Slope Measurement of Lake or Pond